Brookpark Design Builders LLC, Logo
Phone Icon (440) 237-8440
Products For Sale


Roof Sheets

Panel Rib Roof Panel

Panel Rib Roof Panel

If you are on a tight budget, but still need an attractive, high-quality, low-maintenance roof, Panel Rib Roof panels offer the best combination of economy and durability. Panel Rib Roof panels are standard in 26 gauge with 24 gauge and 22 gauge options. The steel panel is 36”

Wide with 1 ¼”-high ribs and is available in lengths up to 41’. The panels are attached with self-drilling, color matched fasteners. Roof slope can be as low as ½:12. Panel Rib Panel can accommodate up to 6 inches of fiberglass blanket insulation for high levels of energy efficiency. All gauges of Panel Rib Roof are available with a Galvalume finish or thirteen (13) colors with KXL finishes as well as a variety of custom colors. The KXL paint system is a PVDF finish applied to the Galvalume surface to give a long-life color that resists fading and chalking. KXL is a 1 mil nom. PVDF finish with a 70% Kynar 500 or Hylar 5000 standard. Panel Rib Roof will meet the requirements for UL Class 60 or UL Class 90 wind uplift.

• 26 Gauge Panel • 24 Gauge Panel

Panel Rib Roof Accessories:

Panel Rib Inside Closure
Panel Rib Inside Closure
Panel Rib Outside Closure
Panel Rib Outside Closure
Mastic Tape 1/4" wide by 40'
Mastic Tape 1/4 wide by 40'
Roof Stitch Fastener - 1/4-14 x 7/8"
Roof Stitch Fastener - 1/4-14 x 7/8
Stainless Steel Fastener (bag 250)
 
Roof Structural Fastener - 12-14 x 1 1/2"
Roof Structural Fastener - 12-14 x 1 1/2
Stainless Steel Fastener (bag 250)
 
  
Gutter Strap
Gutter Strap
20 GA; galvalume finish
Length 19" or 24"
 
Panel Rib Ridge Cap
Panel Rib Ridge Cap
24 Gauge Ridge Cap Length: 3' - 4
Finish: KXL or Galv
 
Eave Gutter
Eave Gutter
26 GA; KXL finish; Length: 20' - 3"
Pitch 1:12 - 5:12
 
 
Color Options for Roof Panels, Gutters, Ridge Cap and Screws: Arctic White, Ash Gray, Classic Beige, Cool Colonial Red, Cool Regal White, Cool Sierra Tan, Egyptian White, Leaf Green, Patrician Bronze, Regal Blue, Tahoe Blue, Terra Cotta, Zinc Grey.

SLR Roof Panel

For a roof that combines good looks, flexibility and strength, take a look at our Architectural Standing Seam Roof panel. SLR panels are standard in either 24 gauge steel or 22 gauge steel with a 2 inch standing seam. The panel is 16” wide and is available in lengths up to 42’. The panel includes a factory installed sealant bead in the side joint for increased weather tightness. SLR panels are field-machine seamed in place, yielding a single unit membrane. The panels require our thermally responsive galvanized panel clips combining a 22 gauge hook and a 16 gauge base. These clips allow for thermal movement 1” in either direction. SLR’s concealed clips attach the panels to structural members and minimize the need for through-the-roof fasteners. Roof slopes can be as low as 1/4:12. SLR Roofs can accommodate up to 6 inches of fiberglass blanket insulation for high levels of energy efficiency. All gauges of SLR Roof are available with KXL finish in 13 standard colors as well as a variety of custom colors.

SLR Roof Panel
The KXL paint system is a PVDF finish applied to the Galvalume® surface to give a long-life color that resists fading and chalking. KXL is a 1 mil nom. PVDF finish with a 70% Kynar®500 or Hylar®5000 standard. UL 90 wind uplift rating is available with supports at 5’-0” on center. SLR is also US Army Corps of Engineers approved for wind uplift resistance. ThermalBlocks (Pictured in blue above)  are available on our website and are necessary for the installation of this product.
 
• 24 Gauge Panel • 22 Gauge Panel

SSR System

SSR System

If you are looking for value with durability, a SSR Standing Seam Roof offers economical construction and superior performance backed by an available 20-year weather-tightness warranty. SSR panels come standard in 24-gauge steel, with 22-gauge optional, all with standard Galvalume® finish. KXL finish is available in six (6) standard colors as well as a variety of custom colors. The SSR Panel is 24” wide and available in lengths up to 50’. The KXL paint system is a PVDF finish applied to the Galvalume® surface to give a long-life color that resists fading and chalking. KXL is a 1 mil nom. PVDF finish with 70% Kynar® 500 or Hylar® 5000 standard. Standard roof pitches range from 1/4”:12” up to 4”:12”, to achieve the roof slope you desire. SSR panels are factory-formed and field-machine seamed in place.

The patented SSR ridge system is efficiently installed with only one weather sealed joint. The special clips used to attach SSR panels to structural members are designed to allow panel movement up to 1 inch in either direction to compensate for thermal effects. VP’s concealed clips minimize the need for roof penetrating fasteners. UL Class 90 rating for wind uplift and FM Class 1-60, 1-90 and 1-120 ratings are available for most applications. SSR panels can accommodate up to 6 inches of faced fiberglass blanket insulation for high levels of energy efficiency. Panels are available in lengths up to 50 feet, which minimizes end lap conditions.
 
 24 Gauge Panel • 22 Gauge Panel